How to use paper as a heart -shaped ring

1. Take a piece of rectangular paper.
1/2 of the rectangular width is the width of the ring heart shape, so everyone must grasp the size of the paper according to their preferences.
2. Fold the four -class lines on the vertical direction.
3. The middle line of the two corners is folded and expanded.
4. Fold the long -side crease on the right side of the right side.
5. The same treatment on the left, we can now see the plane of the heart shape.
6. The paper turns over.
7. Fold the crease in the picture.
8. Fold the long strips along the crease, pinch it, and fold the long strip to the left, as shown in the figure.
9. The upper layer is folding downwards.
10. Open the upper layer of the long strip as shown in the figure, and fold the long strip to our right hand side along the crease.
11. Fold the upper layer down in the method of step 9.
12. Fold the part of the step 10 up.
13. Will the long strips be rolled up and insert the tail end into the just discounted mezzanine as a ring. If the paper is too long, we can remove a small paragraph at the end of the long strip according to the thickness of the fingers.
14. The part of the single layer on the ring on the ring is folded into the inside of the ring, and the last triangle part is also stuffed and completed.
15. Two arcs above the heart shape.
16. Cultivation. My ring is a bit bigger, like a big decorative ring.