1. Simple red rope bracelet compilation method is to use two ropes, one rope as the center, and the other rope around it. San. 2. Red rope bracelet compilation method
After the bracelet is compiled, put on the end of the line on both sides, and the dual -line dual -tie on the part of the parting part can be pulled. You can be suitable.
Pay content for time limit to check for freen回答材料：红绳1米，绿绳半米步骤：1，绿绳对折夹住2，红色的线绳先系到绿色线绳上，3，红色线从左面下面穿过绿色的线，再从A green thread is tightened on it, 4, passing through the two green lines through the red line through the right side, tightening. 5. The knot of a worker is done. It will be completed until the right length 6 end.
After the bracelet is finished, put on the end of the line on both sides and compile the dual -line dual -tie in the part of the part, then you can pull it to pull
1. Simple red rope bracelet compilation method
is to use two ropes, one rope as the center, and the other rope around it. San.
2. Red rope bracelet compilation method
After the bracelet is compiled, put on the end of the line on both sides, and the dual -line dual -tie on the part of the parting part can be pulled. You can be suitable.
Pay content for time limit to check for freen回答材料：红绳1米，绿绳半米步骤：1，绿绳对折夹住2，红色的线绳先系到绿色线绳上，3，红色线从左面下面穿过绿色的线，再从A green thread is tightened on it, 4, passing through the two green lines through the red line through the right side, tightening. 5. The knot of a worker is done. It will be completed until the right length 6 end.
After the bracelet is finished, put on the end of the line on both sides and compile the dual -line dual -tie in the part of the part, then you can pull it to pull
Using other lines, tie cuts, can be found on Baidu, the Chinese bracelet editing method