The body material of the LED buried lamp is die-cast or stainless steel, and the surface cover material is stainless steel. Additional parts are silicone sealing ring, extreme strength toughened glass, waterproof joint, silicone rubber sealing ring, PCB, LED or lens, waterproof potting glue. The screws of the LED buried lamp are made of stainless steel, and the protection grade of the lamp should be up to 1P67; plastic embedded parts can be selected for installation and maintenance of LED buried lamps.
LED buried lamp and China ws2818 led strip light manufacturer have a variety of colors, can achieve red, yellow, blue, green, white, colorful jump, gradient and other results. LED buried lamps have the characteristics of extreme brightness, low energy consumption, soft light, no glare, and its efficiency can reach 85%.
The input voltage for a high-power LED buried lamp is AC 220V or DC ∅5 for a 24V light source. You can use a standard tiny power (∅5 or SMD2835, SMD5730, SMD5630) light source and a high-power 1W light source and COB light source. This kind of lamp is widely used in green belt, parks, lawn, courtyards, pedestrian streets, parking lots, squares and other places lighting.
The glass of the LED buried lamp must be tempered and stress-free, and its strength should be able to withstand the impact force of 2~4N/cm with a thickness of 5-10mm. The hardness of the rubber ring is 35H. He should be a U-shaped rubber ring, because such a rubber ring can be directly set on the glass. The waterproof lens must have a certain distance from the tempered glass to avoid affecting the quality of the light.
Commonly used LED buried lamps have 7 sizes, 5 voltages and 3 lampshades. The seven size specifications are ∅60mm x H80mm, ∅68mm x H80mm, ∅68mm x H87mm, ∅90mm x H102mm, ∅100mm x H102mm, ∅110mm x H102mm, and ∅110mm x H110mm. The five voltages are DC 12V, DC 24V, DC 24V, DC 100V, DC 120V, and DC 240V. Three kinds of lampshades are beveled edge and glass lens, flat edge and glass lens, beveled edge and curved glass lens. The shell of the LED buried lamp is a die-cast aluminum shell with a thickness of more than 3mm, and the direct or indirect contact area between the lamp shell and LED is more than 80%. When filling glue around the waterproof lens (thermal sealing silica gel), the glue should be filled to 1/2 part of the waterproof lens. Waterproof power supply for LED buried lamp with protection grade of IP67 or above.